Justsendit
Member
It’s Raptor Liner which is very similar.
Chainsaw pic's
- Thread starter Czed
- Start date
tacotodd
Member
tacotodd
Member
Previous pictures are MY arsenal. From top to bottom: Echo CS550P with 16” Cannon bar so I had a replacement tip which allows me to run 3/8 chain (no other bar exists to do this & no bar adapter will fit), Husqvarna 372XT w/28” Stihl bar (superior bar material for wear), Husqvarna 365XT with 372XT transfer covers) w20” Stihl bar (same reason). All three have generous muffler mods for free breathing and lower operating temps and a EXCELLENT tune. Echo & 372 wear 7 tooth drives but 365 wears 8. I’m extremely happy with what I’ve got. Echo & 365 have vacuum leaks that I’m fixing but the 372 runs fantastic 
I’m extremely tickled with that unit because sometimes I run a 32” BC on it but not often because 28” will do most of the things that I need.
I’m extremely tickled with that unit because sometimes I run a 32” BC on it but not often because 28” will do most of the things that I need.
RedneckChainsawRepair
Active member
These were my dirty dozen. All but one was ported. 3 were race ported.
Work and gtg racing fun. Covering all classes.
Work and gtg racing fun. Covering all classes.
motorhead
New member
He's the toughest old fella I know
He rolled his atv a few weeks ago
And broke some ribs.
He wouldn't go to the hospital
Because of covid.
So he had his daughter wrap his ribs tightly
Then not two days later
He was leaning against his house
As he push mowed the yard.
I moved here 8 years ago
And I drop the large and hazard trees
He can't
But he runs a saw much more than I do
On his 220 acre farm.
Beautiful dog
RedneckChainsawRepair
Active member
Few of the 084's 4 of 5 and 2 166. 3120's not in the pic that day.
It's a Mountain fiest I'm told
It's good to have a partner to cut with!
That PM270 looks clean. Hope mine comes up as nice as that
Jonsereds 920
It was one of my friends timber saws
After he passed away
His son gave it to me.
I rebuilt it and gave it to my niece's husband
He worked for the logger using this saw.
It'll set for months and start on the first pull most every time
That's a new 10mm total 24" bar
Just set in a barn too long.
Dolmar 115 I won in a raffle
A 028 super someone gave me
And a ported chusky 372 with a bb kit and a 272
Piston with pop up.
I gave these to my nephew he has 30 acre's
I cut all the hazard trees for him
He has thousands of pine the wind takes down often.
Clean ....
Blasterman
Member
This is my little poulan 3400 that is a nice saw, I did a little work on it and it grew up a little to 98cc. It is called Green Ripper. Thought some of you might be interested in a sleeper saw 
