Latest activity
-
Jjpsbgt replied to the thread Stihl 021 No Oil At Bar ?.Follow up ! After removing the handle I gained access to the oil line, filter, and oil pump elbow. The tiny O ring on the elbow was...
-
JHoping someone can help me out. I've got a Stihl 025C. It's about 20 to 25 years old. I can get it to run at high RPM but when I back...
-
Bob Hedgecutter replied to the thread Husquava 435 starts but stops when throttle pressed..Not a favorite saw of mine- just about hate them- but willing to bet the farm the saw has been running on a lean condition of either... -
Sshepherdess posted the thread Husquava 435 starts but stops when throttle pressed. in Chainsaw Questions.My husband is having a problem wth his Husquava 435 which is getting worse. He can start it OK but it runs at high revs and if he...
-
OOhionut replied to the thread Husky won't pull.I saw that and got it lined up, but now it ain't starting. Hoping I flooded it but kinda doubtful. It's been a flawless for years, so...
-
Bob Hedgecutter replied to the thread Husky won't pull.Well, much better being that- than the alternative. ;) :p When you put it back together, make sure the key is aligned with the slot in...
-
OOhionut replied to the thread Husky won't pull.Bob, I love you, man! If you can't see the attached photo, it is of the underside of my flywheel with the kill/ground screw held by the...
-
-
OOhionut replied to the thread Husky won't pull.Yea, after I asked how to remove the flywheel, I found many helpful videos online—sorry :( I will try to dislodge before removing, but...
-
Bob Hedgecutter replied to the thread Husky won't pull.Possibly is the ground screw and possibly attached to the flywheel at the magnet. If you cannot pick, shake, rattle or roll it out as it...
-
OOhionut replied to the thread Husky won't pull.Thanks, Bob! Actually, maybe it's the ground screw that dropped out that's jamming it?! Is removing the flywheel simple?
-
Bob Hedgecutter replied to the thread Husky won't pull.I cannot view the attached video. If I had to guess, first one would be something lodged between flywheel and case- like a stray bolt-...
-
OHi. Husqvarna 440 has been a real trooper for years. Background: Yesterday, Saw has been starting perfectly. The kill switch...
-
Bob Hedgecutter replied to the thread Stihl 021 No Oil At Bar ?.Post one you said plenty oil coming from pump- post 3 and 4 you confirmed that- why are we now digging deeper? Off the top of my head-...
-
Jjpsbgt replied to the thread Stihl 021 No Oil At Bar ?.Inspected the worm gear and found it fully functional. Oil does appear at bar pad but still nothing showing on the chain or bar. Next...
-
Jjpsbgt replied to the thread Stihl 021 No Oil At Bar ?.Thanks Bob ! I have to go to town tomorrow anyway so I will let the Stihl guy remove the drum. I read about using rope but will pass on...
