Latest activity
-
Bob Hedgecutter replied to the thread Stihl MS 162.If it is a new saw- take it back, its under warranty. If bought at a dealer- ask for instruction on how to cold start it. They have a... -
BBought new on Saturday, brought it home and attempted to start it after filling gas mixture. Messed with it for an hour with no success...
-
Bob Hedgecutter replied to the thread Jonsereds 910E.
-
-
Bob Hedgecutter replied to the thread Nut Job - Husqvarna 440.Okay, if your chain is that kapoodled that tightening the clutch cover caused it to bind- I would be looking pretty seriously at the...
-
peterjd6 replied to the thread Nut Job - Husqvarna 440.No I haven’t replaced either of those until today. I went down to the hardware store to get a new nut. They didn’t have any... -
Bob Hedgecutter replied to the thread Nut Job - Husqvarna 440.So anyhow- have you recently replaced the chain- the bar- or both?
-
JJeffster1978 replied to the thread Question About A New Chain....That makes sense. Yes that bar is relatively new as well. Really appreciate the help!!
-
peterjd6 replied to the thread Nut Job - Husqvarna 440.Thanks, it is weird. Going to pick up a new nut this afternoon and see if that solves the problem. Hope it does because it will be a...
-
Bob Hedgecutter replied to the thread Question About A New Chain....In my way of thinking, pretty normal and once run a bit, you might find it settles into a more conforming shape. Put your old chain back...
-
Bob Hedgecutter replied to the thread Nut Job - Husqvarna 440.Have you recently replaced the chain- the bar- or both? If all ducks are in a row, the nut must be reasonably tight to do its job- not...
-
JGood afternoon guys! I have kind of a strange question. I have a Stihl MS462 and I recently purchased a new chain for it. I had a yellow...
-
-
while running my husky 440 the nut that holds the clutch cover in place keeps vibrating loose. I have to stop ever 5 minutes or so to...
-
Bob Hedgecutter replied to the thread No start -- Flywheel magnets?.291's are a temperamental kind of saw- I would be pressure and vacuum testing as a matter of course if it is hard to start/wont start.
-
Sscottz replied to the thread No start -- Flywheel magnets?.Thank you; exactly what I needed to know. I think that means my flywheel is good. Maybe the spark is not as weak as I thought. I...
-
Bob Hedgecutter replied to the thread No start -- Flywheel magnets?.No, you should not. The second pair of unmarked "magnets" are counterweights- they mimic the weight of the actual magnets that cause...
