Chainmale
Member
Just finished rebuilding an old Stihl 015 (don't ask me why. Bought a couple of parts to begin with and one thing led to another)
I checked for spark before tearing it down. Did seals, crank bearings, piston and rings. Passed pressure and vac on engine+ carb and fuel hose. Comp test over 150psi.
Anyway... I've got good blue spark on my spark tester and at the plug but it's not even popping off with some mix down the carb. Can I rule out coil and condenser as the culprits? Flywheel, key and coil gap are set. I'm going to figure out how to set the points tomorrow
Sorry for the speech lol tried Google but thought id chuck a question up here
I checked for spark before tearing it down. Did seals, crank bearings, piston and rings. Passed pressure and vac on engine+ carb and fuel hose. Comp test over 150psi.
Anyway... I've got good blue spark on my spark tester and at the plug but it's not even popping off with some mix down the carb. Can I rule out coil and condenser as the culprits? Flywheel, key and coil gap are set. I'm going to figure out how to set the points tomorrow
Sorry for the speech lol tried Google but thought id chuck a question up here