Husqvarna 435eII Rebuild Question

[kevlarx10]

Hello!

A few months ago I accidently crushed my 435eII. Not as bad as it sounds... it cracked the crankcase so I had to go through the process of transferring EVERYTHING to the new crankcase. It went well (started up but didn't run too long nc I used some gasket maker) but I have one question. There was one area that looks like I might have missed a line hook up. Can anyone confirm the picture as how it is suposed to be or what I missed. Thanks!!

 

[Bob Hedgecutter]

That is the fuel tank vent- it breathes to atmosphere for the tank interior through a one way valve and does not require any hose or line.
There are only two fuel lines on this model- one from tank and filter to carb and the other is a return line to tank from the purge valve.

 

[kevlarx10]

That is the fuel tank vent- it breathes to atmosphere for the tank interior through a one way valve and does not require any hose or line.
There are only two fuel lines on this model- one from tank and filter to carb and the other is a return line to tank from the purge valve.

Thank you for giving me peace of mind!!