So I recently bought an old saw that I believe to be a Lancaster, either a 60HL or 50HL. I haven't been able to get good access to the engine tag, but it fits the description of a Tecumseh AH480. I am in the process of dissembling it, and am stuck on the centrifugal clutch, I just can't figure out if it is standard or reverse thread. So I'm hoping somebody might know.
I have confirmed that the contact points are bad, and the spark plug lead on the ignition coil is broken. I have been able to find carb parts, but nothing else, So far all of my research for parts has come up dry, so I would appreciate a point in the right direction on sources.
I'll attach a few pictures, but unfortunately I didn't take any before I started taking it apart.
I have confirmed that the contact points are bad, and the spark plug lead on the ignition coil is broken. I have been able to find carb parts, but nothing else, So far all of my research for parts has come up dry, so I would appreciate a point in the right direction on sources.
I'll attach a few pictures, but unfortunately I didn't take any before I started taking it apart.
