Paddy_Power
New member
Hi all,
I have a Proplus chainsaw (Chinese brand). I took it out the other day after not using it for a few months. It fired up and idled but when I started cutting with it it would stall. It has gotten worse and now when it fires up it over revs and cuts out. I have changed the main fuel line to the carburetor as it was perished and cracked and checked the filter at the end of the pipe, I have changed the needle and spring in the carburetor, the diaphragm and gaskets. I have checked the fuel tank vent too which is fine. It has a walbro carburetor/
Any help or suggestions would be greatly appreciated.
All the best
Paddy
I have a Proplus chainsaw (Chinese brand). I took it out the other day after not using it for a few months. It fired up and idled but when I started cutting with it it would stall. It has gotten worse and now when it fires up it over revs and cuts out. I have changed the main fuel line to the carburetor as it was perished and cracked and checked the filter at the end of the pipe, I have changed the needle and spring in the carburetor, the diaphragm and gaskets. I have checked the fuel tank vent too which is fine. It has a walbro carburetor/
Any help or suggestions would be greatly appreciated.
All the best
Paddy