088 crankshaft repair

[Scott kunz]

 

[Bob Hedgecutter]

I would not have thought of ever doing it in such a way!
My first instinct would be to remove the crank to work on it. Leaving it in the saw seems to be a cunning plan.

 

[Fabz]

 

[Cajun3197]

Man that’s slick Scott. Thanks for sharing

 

[scarr]

I've fixed them with the crank out in the lathe or repaired just a small chip with the crank installed and finished it by hand. Never thought to spin the whole thing in the lathe.

Nice work!