Thats the bottom of the air filter shown in pics and then it set down on the air filter housing. Same filter on 501 4910 490. ;)
Here flip over for ya. Still same filter.
Then back over. Brand new filter before the easy o-ring fix gets put in like I showed.
Anything is possible. But I wouldnt do it.
32" 3/8 on a 59cc clone G366 59cc. I did same thing on a OEM 361 too. The clone actually oiled the 32" bar better in the buried cuts.
Both actually cut with ease in buried too.
Just for chits and giggles testing.
Yep diaphragms and check valves get stiff. Good time to clean the screen inside and replace too.
Rebuild it first IMHO. Take pics if your first time so you know how when going back for right order etc.
Neither also if me.
But if it is a stihl. Get the older MS250 before the 251,
That size saw today take a good look at Echo.
Everyone loves this 40cc https://www.echo-usa.com/chainsaws/cs-400
Then you got the 45cc https://www.echo-usa.com/chainsaws/cs-4510
I would jump to this pro build...
2 saws use that model #. That # comes back to the little micro top handle saw right? If so. A041 mount and 16" will be picco using stihl nameor 3/8LP 050 56DL
Tons of that stuff out there and easy to get even at a walmart.
Look like this but in grey, red or etc?
Now if it is the newer red...
The 272 oring will fit inside the air filter like shown.
Same thing is done on the 590 but with a different oring used to help stop the fines on that model.
You finding fines in your carb throat from getting by air filter? Just curious. Most folks find them on 490 4910 501. I did too.
Easy fix in pic. Stops it.
Bet just tuned to lean or had a air leak somewhere. Long as it was a good FB FC FD oil name dont really matter. FD the best of best.
Had to clean up a 490 cylinder I took on trade. Had a air leak.
Also just so you know. Even OEM saws come with flaws. ;)
How many NEW 395 and 390 have had the pistons installed backwards from the factory ;).
Think they said it was 2 batches of the 390 done that way. Makes you feel for those poor owners.
So dont trust sending a new one out or one you get...
On the Holz G395 piston slap. What we told Walt to check as we already found out over in my chainsaw repair group FB.
The $4 piston they use was out of spec at 55.86 where 55.94 55.95 55.96 is most other is A AB B
20-40 dollar new piston and 30mins and back on the road with no slap. Still...
Thats easy. ;) MS660 is cylinder copied. Why I said runs like 660. I had no decomp 066 a couple of them. Big difference in OEM saws too. ;)
G466 copied after the crap MS460 cylinder. Had to use a 046 cylinder D cc to get it to run like it should.
The blue 372 are just a no. Only the 372xp...
Early was early. The new stuff is so much improved. No comparison to early stuff. I get them because I am curious to see. Plus I like the older saws.
My G660 if I would close my eyes when testing and handed me the oem one I was testing with it would have never known which was which in cuts...
😇
Added touch to mine from restoring huskys years back. Come in blue and orange 339 359 shipped. Took 3 days from US stock Farmertec.
Most of the video dont do justice. They running them pig fat out of the box. 9-10K. I turned mine up to 12.2ish and rips like oem even on first cuts.
Need any 54mm cylinders still have 2 leftover 😇. Think 1 of the 445 50mm quad ports and 1 425 48mm quad ports cylinders too. I'm done building them and been selling off the used and NOS parts off now.
Have one 2 ring piston that has less then 2 tanks on it testing it out. Came from a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.