Latest activity
-
OIt is a very simplistic way of allowing air back into the tank to replace used fuel and stop fuel exiting the tank when the saw is...
-
Bob Hedgecutter replied to the thread Gas tank venting.It is kind of complicated to explain- not sure if I have an 011 to show you- but in the corner of the air box the carb is in there is a... -
GGIBSAW replied to the thread Gas tank venting.There is a small diameter one-piece brass tube nipple where one end is located inside the gas tank at the very top, and it's curved...
-
GIt is a very simplistic way of allowing air back into the tank to replace used fuel and stop fuel exiting the tank when the saw is...
-
Bob Hedgecutter replied to the thread Gas tank venting.It is a very simplistic way of allowing air back into the tank to replace used fuel and stop fuel exiting the tank when the saw is...
-
GI am do some maintenance on a 34-year old Stihl 011AVT. In replacing the gas tank vent rubber tubing (it had started to crumble apart)...
-
Mmastermason reacted to Bob Hedgecutter's post in the thread Husqvarna 77 chain for bow bar with
Like.
Well you need a drive link count to know if it is the same as a premade loop- or if you want to have one made at any saw shop worth a... -
Bob Hedgecutter replied to the thread Husqvarna 77 chain for bow bar.Well you need a drive link count to know if it is the same as a premade loop- or if you want to have one made at any saw shop worth a...
-
Mmastermason replied to the thread Husqvarna 77 chain for bow bar.Thanks. I figured I’d get some insight from anyone who might know whether I’m able to buy one as is or have to get one cut for it
-
Mmastermason reacted to Bob Hedgecutter's post in the thread Husqvarna 77 chain for bow bar with Like.
Very cool set up. Looks to be in real nice condition. Step 1: Remove chain. Step 2: Mark a drive link with a paint pen or sharpie...
-
Bob Hedgecutter replied to the thread Husqvarna 77 chain for bow bar.Very cool set up. Looks to be in real nice condition. Step 1: Remove chain. Step 2: Mark a drive link with a paint pen or sharpie...
-
Bob Hedgecutter replied to the thread Husqvarna Carburetor Jet Tool?.https://www.lsengineers.co.uk/husqvarna-5mm-adjustment-tool-for-carburettors-oem-no-598-84-69-01.html?fbclid=IwY2xjawM8QAdleHRuA2FlbQIxMA...
-
MWondering if anyone knows where I can get a chain for the bow bar on my L77, how many drive links and what length? Thanks
-
-
Bob Hedgecutter replied to the thread Husqvarna Carburetor Jet Tool?.The tool I am thinking off has a red handle and black shaft. Give me a minute and I might be able to find a part number
-
Bob Hedgecutter reacted to Alec Peirce's post in the thread Husqvarna Carburetor Jet Tool? with Like.
Just what I needed to know. Thanks.
