Jonsereds 80

[Bob Hedgecutter]

Have one already- but another arrived at my doorstep yesterday.
They differ in slight ways, mainly around the recoil starter. Has the usual missing bits and broken bits where it comes to 1970's plastic, but is otherwise 99% complete and runs.

 

[Bob Hedgecutter]

Only part really missing was the one lower bolt for the front of the rear handle- fortunately these are the same as the hex head cap bolts found in the front of Husqvarna 2## saws- around 5mm X 50mm- so one of those and a 5mm hex nut replaced the missing one and all excess flex is removed from the system.