Bob Hedgecutter's latest activity
-
Bob Hedgecutter replied to the thread MAKITA EA6100P 72DL 3/8 .058 how to upgrade to 24 inch bar/chain.1: Possibly 2: What you can afford. 3: Yes. Now to explain: Drive sprockets and nose sprockets on bars are NOT gauge specific and are... -
Bob Hedgecutter replied to the thread Decompression valve.If it was easier to start beforehand and this hard to start condition is just being noticed- it might be time for a carb clean and kit...
-
Bob Hedgecutter replied to the thread Husqvarna 440.Are you 100% sure the brake is fully disengaging and staying set in that position- or is it tripping easily? Also sounds like your chain...
-
Bob Hedgecutter replied to the thread Husky Rancher.Husqvarna do not make bars- they have them made and branded for them- they used to be always Oregon bars, but they had Sugi Hara for a...
-
Bob Hedgecutter replied to the thread Husky Rancher.For a start- saws do not have blades- they have bars. :ROFLMAO: So it came without bar and chain? First thing to check is the...
-
Bob Hedgecutter replied to the thread Stihl MS271 won't start.No saw in running condition should require starter fluid to cold start- if it does, then something is wrong. With a used 271- that...
-
Bob Hedgecutter reacted to Desert Rat's post in the thread G'day all from an old bloke that likes being in the bush cutting firewood and keeping them old saws going with
Like.
-
Bob Hedgecutter replied to the thread G'day all from an old bloke that likes being in the bush cutting firewood and keeping them old saws going.Welcome, which part of the big red dust bowl are you in? What kind of saws are you saving?
-
Bob Hedgecutter reacted to Desert Rat's post in the thread G'day all from an old bloke that likes being in the bush cutting firewood and keeping them old saws going with Like.
-
Had a few of the Jonsereds out for a play today- started with 2094, rocked a chain on a hidden in bark rock on the first cut. Went to...
-
-
Bob Hedgecutter replied to the thread Husqvarna 51.Porting a saw (in my limited on subject opinion) involves a bit more than just grinding out some aluminium and hoping. It requires some...
-
Took a gamble recently- Husqvarna 288XP, online- limited photographs- advertised as a redundant running saw, no longer needed as wood...
-
-
Bob Hedgecutter replied to the thread Husqvarna vs Stihl.If you are just going to put those two up against those two- then it comes down to personal preference and what feels nice in the hand...
-
Bob Hedgecutter replied to the thread Ms361 starts but stalls quickly.If it passes that- say sits at 7lb for 5 minutes- (I doubt it will) then go to vacuum test but do not exceed .4-.6 BAR or 11.8-17.7 in-Hg.
-
Bob Hedgecutter replied to the thread Ms361 starts but stalls quickly.Start with pressure- should hold 7lb for a good long while.
