Bob Hedgecutter's latest activity
-
That's a brand I had never heard of or crossed paths with over the years until a few years ago. A buddy who was a bit of an auction buff... -
I found this site looking for info on some older saws I inherited a while back. Mostly McCulloch and Stihl models, about 30 or so in all.
-
Bob Hedgecutter replied to the thread Got a problem Partner.:D Cheers- but thats only one of about 60 Jonsereds that lives here.
-
Bob Hedgecutter replied to the thread Got a problem Partner.Or perhaps, lack of use and sitting for a long while they were not exactly freed up on the pivot points and did not inertia out of the...
-
Bob Hedgecutter replied to the thread Got a problem Partner.???? Explain too tight? You mean the pawls were were not free on their studs? Fixed too tight to the flywheel and were not returning to...
-
Bob Hedgecutter replied to the thread Got a problem Partner.Not 100% sure, but possibly the same as P80- R35- other R435's. There will be parts out there, just have to find them. Might be best to...
-
A fellow chainsaw enthusiast from up top of our other Island, sent me this the other day. He rescued it from a recycling centre! 2055...
-
-
Bob Hedgecutter replied to the thread Problem with Husqvarna 254 throttle mechanism.Sounds like somehow you managed (whilst cleaning) to misalign the fast idle feature and once choke was engaged to activate the fast idle...
-
Bob Hedgecutter reacted to hymek's post in the thread Problem with Husqvarna 254 throttle mechanism with
Like.
Thanks. Having done some testing, I've come to the conclusion that the problem isn't the throttle rod or return spring but is related to... -
Bob Hedgecutter replied to the thread Black decker chain won't turn.Not familiar with the saw type- but if it has a chain brake fitted- is that engaged? Failing that, wear/damage to the drive sprocket or...
-
Bob Hedgecutter replied to the thread Problem with Husqvarna 254 throttle mechanism.I would disconnect the throttle rod and see if the spring enables full travel without the rod attached- if it is still sticky- either...
-
Bob Hedgecutter replied to the thread Problem with Husqvarna 254 throttle mechanism.Sounds like the return spring has broken- or the captured end of the spring has jumped out of position. Has the carb been off lately...
