B
BayouCountryPowerSaws
Guest
This will be the start of the Sachs Dolmar/Dolmar/Makita brand specific thread.
Indiana.Doug
New member
- Local time
- 9:19 AM
- Joined
- Sep 2, 2021
- Reaction score
- 12
I would enjoy discussing the differences between the PS-7900 and the rare PS-7900 RS. Anyone with info, please chime in!
B
BayouCountryPowerSaws
Guest
Nice! Are those a 6000i and 6800i? One of my favorite chassis of all time!couple of my favorite saws
Indiana.Doug
New member
- Local time
- 9:19 AM
- Joined
- Sep 2, 2021
- Reaction score
- 12
Great sawscouple of my favorite saws
RS had black spikes, muffler, top handle, carb floor, and a blue unlimited coil about sums it up iirc.
BigSachsDolmar
Member
i have a couple modified 6400s and a 119 and they are my go to in the 60 to 90cc saw class they can be a bit heavy but if weight is an issue i have my 346xp i can lug up in a tree if my modified 193 wont do the job. the only other saw of mine that has its place by the dolmars is a jonsereds 920 and its basically a dedicated milling saw
Attachments
B
BayouCountryPowerSaws
Guest
I am not aware of any significance between the 120si and the 6800i. I know that there is only one number difference in the part numbers between the two. The 120si is 030 130 000 and the 6800i is 030 130 001. I have owned both and both run great, some of my favorite saws to run!
Harold-Sachs
New member
Anyone porting any 9000/9010/694? I know Kensie’s is a ripper! Any insight would be great thanks!
BigSachsDolmar
Member
i have a 85cc 6400/7900 chasis saw i will be porting once i catch up on other saws 54mm big bore jug on a dcs6421.. i missed out on a 9010 for 500 a while back cause it was a 3 1/2 hr drive
Harold-Sachs
New member
Awesome! Looking forward to seeing it!
ya I scored mine for 500CAD which is the equivalent of 3$ US! Great saw!
ya I scored mine for 500CAD which is the equivalent of 3$ US! Great saw!
BigSachsDolmar
Member
This is the saw
B
BayouCountryPowerSaws
Guest
Can't say I've ever seen that before lol, what kind of plug does that thing have in it, a standard plug? I've seen saws blow fire on start up, but never every time you throttle up lol
BigSachsDolmar
Member
this was the result of putting a 54mm jug on the dcs6421 if it was a 6401 it wouldnt do this the 21 in the model number notes the saw has a catalytic muffler also the fuel wasnt non ethanol. pretty cool but a quick way to burn up a work saw its since been swapped to a custom 461 muffler and lots of other goodies. my favorite saw for sure pulls a 3/8 36 or a 404 32 just fine cant wait to cut up the jug...lol
Indiana.Doug
New member
- Local time
- 9:19 AM
- Joined
- Sep 2, 2021
- Reaction score
- 12
test cuts on my freshly ported Dolmar PS-7900
RedneckChainsawRepair
Active member
MVP ported 166 for race and a woods ported 166 by another Canadian from NS I can no longer recall name of.
tacotodd
Member
Roller tips on both bars, WOW!
Nutball
Active member
NOS 9010
Okiefirewood
New member
