chipperman@1809
New member
I have a Mini-Mac 6 with Walbro carb # MDC 1. I can't find a kit to find this carb. I found all kinds of kits but all say it won't fit a Walbro MDC 1. Thanks for any help
McCulloch min-mac 6 carb. kit
- Thread starter chipperman@1809
- Start date
K1MDC is the major repair kit you are needing.
chipperman@1809
New member
I looked up K1MDC but kit doesn't find my Walbro MDC-1 carb. Looking for kit # DI-26153
By golly- looks like you are correct- K1 does every other carb from #2 to 15- but not the very first #1.
My mistake sorry.
However, a google search of M1 26153 does bring up a few options.
chipperman@1809
New member
Bob,
This McCulloch is quite old. Used it in my tree service back then. Looked at a battery operated chain saw but heavier than my saw.
Thanks,
Steve
This McCulloch is quite old. Used it in my tree service back then. Looked at a battery operated chain saw but heavier than my saw.
Thanks,
Steve
Yep aware of them, if I looked a bit I will have an original bar for one in the shed- but yours is a very early example- first edition and as such is the only one with the odd carb.
chipperman@1809
New member
Thanks for the information. No wonder I can't find a carb kit. Do they make a replacement car. I have bought two Chinese carbs and have had good luck
Steve
Steve
@chippeman
Not sure if you had any luck finding the carb kit, but found this....
www.dicarbparts.com
Not sure if you had any luck finding the carb kit, but found this....
Walbro MDC1 Carburetor McCulloch Early Power Mac 6 Chain Saw Carb Kit DI 26153
DI 26153 You are purchasing a Basic Repair Kit for a Walbro MDC 1 Carburetor. Application: McCulloch Early Power Mac 6 NOTE! This Kit will not work on any other MDC Series Carburetor MDC-1 Was only used on the very first Power Mac 6 Will not work on MDC-2 and above Later Power Mac 6 Saws...
www.dicarbparts.com